特点及应用Features and Applications
■ 差模-共模复合电感器(DCCC),是一种能有效地抑制传导电磁干扰的电感器,它具有较高的差模和共模阻抗值。
Differential mode andCommon mode Combination Choke(DCCC)is an excellent EMI suppression choke, providinghigh differential mode impedance and common mode impedance .
■ 采用DCCC的EMI滤波器,不仅插入损耗高,滤波性能好,而且体积小,成本低,功耗少Using DCCC in EMI filter, not only the insertionloss is enhanced, but also the power loss is lower, the size andcost are reduced .
■ 适用于电子设备、电子测试仪器、开关电源、LED驱动电源、电子整流器和不间断电源。Used in electronic equipments, measuringinstruments, power supplies and UPS.
■ 绝缘等级F ,C-TUV-US认证、 UL/C-UL认证 .设计要求符合N60938-2标准。Insulation class F, Design complies withEN60938-2.
■ 平均故障间隔时间@40 degree C/230V(MIL-HDBK-217F):>5,000,000hours。无铅,符合欧盟指令MTBF@40°C/230V (Mil-HB-217F): > 5000000 hours; Lead free, RoHS Compliant.
结构Construction
■ 铁氧体磁芯/FR4底板 (非易燃绝缘体UL94V-0材料) / 扇形绕组。Ferrite Core / FR4 Spacer (Flammability Retardant UL94V-0) / SectorWindings
技术参数Technical Data
■ 额定电压:250VRated Voltage:250V
■ 工作频率:50/60HzOperating Frequency:50/60 Hz
■ 额定电流:4A~50A@40°C环境温度Rated Current:4A to 50A @ 40°C ambient temperature
■ 耐压测试:绕组对绕组 1500 VAC, 2sTest Voltage :Winding to Winding 1500 VAC , 2s
■ 气候类别:40 / 125 / 56 (-40°C/ +125°C)Climatic Category : 40/125/56 (-40°C / +125°C)

技术数据表Choke selection table
型号编号 Choke type P/N. | 额定 电流Rate Current IR (A) | 共模电感Common Mode Inductance LCM( mH ) ±30% | 差模电感Differential Mode Inductance LDM( μH ) Typ. | 电阻RDC (mΩ) Typ. | 结构类型Configuration Type A ~F | 输出终端Terminals | 重量Weight 约 Approx. (g) | ||
引脚Pins Ф (mm) | 间距Spacing (mm) | ||||||||
D3C-T31HB-040 | 4.0 | 15 | 2200 | 97.7 | A | 0.7 | 10x35 | 65 | |
D3C-T31HB-060 | 6.0 | 10 | 1500 | 46.4 | 0.9 | ||||
D3C-T31HB-080 | 8.0 | 6.8 | 1000 | 25.7 | 1.1 | ||||
D3C-T31HB-100 | 10.0 | 3.9 | 600 | 16.1 | 1.2 | ||||
D3C-T31HB-120 | 12.0 | 2.7 | 400 | 11.7 | 1.3 | ||||
D3C-T31HB-150 | 15.0 | 1.5 | 220 | 7.4 | B | 1.0 | 10x35 20X35 | ||
D3C-T31HB-200 | 20.0 | 0.68 | 100 | 4.3 | 1.2 | ||||
D3C-T31HB-250 | 25.0 | 0.47 | 70 | 2.7 | 1.4 | ||||
型号编号 Choke type P/N. | 额定 电流Rate Current IR (A) | 共模电感Common Mode Inductance LCM( mH ) ±30% | 差模电感Differential Mode Inductance LDM( μH ) Typ. | 电阻RDC (mΩ) Typ. | 结构类型Configuration Type A ~F | 输出终端Terminals | 重量Weight 约 Approx. (g) | ||
引脚Pins Ф (mm) | 间距Spacing (mm) | ||||||||
D3C-T31VB-040 | 4.0 | 15 | 2200 | 97.7 | C | 0.7 | 10x20 | 65 | |
D3C-T31VB-060 | 6.0 | 10 | 1500 | 46.4 | 0.9 | ||||
D3C-T31VB-080 | 8.0 | 6.8 | 1000 | 25.7 | 1.1 | ||||
D3C-T31VB-100 | 10.0 | 3.9 | 600 | 16.1 | 1.2 | ||||
D3C-T31VB-120 | 12.0 | 2.7 | 400 | 11.7 | 1.3 | ||||
D3C-T31VB-150 | 15.0 | 1.5 | 220 | 7.4 | D | 1.0 | 20x20 | ||
D3C-T31VB-200 | 20.0 | 0.68 | 100 | 4.3 | 1.2 | ||||
D3C-T31VB-250 | 25.0 | 0.47 | 70 | 2.7 | 1.4 | ||||
D3C-T39HB-060 | 6.0 | 15 | 2200 | 75 | E | 1.3 | 15x45 | 100 | |
D3C-T39HB-080 | 8.0 | 10 | 1500 | 44 | 1.3 | ||||
D3C-T39HB-100 | 10 | 6.8 | 1000 | 26 | 1.5 | ||||
D3C-T39HB-120 | 12 | 3.9 | 600 | 17.2 | 1.6 | ||||
D3C-T39HB-150 | 15 | 2.7 | 400 | 12.6 | 1.6 | ||||
D3C-T39HB-200 | 20 | 1.5 | 220 | 6.8 | F | 1.5 | 15x45 | ||
D3C-T39HB-250 | 25 | 0.68 | 100 | 4.2 | 1.5 | 25x45 | |||
D3C-T39HB-300 | 30 | 0.47 | 70 | 2.6 | G | 1.5 | 15x45 25x45 35x45 | ||
D3C-T39VB-060 | 6.0 | 15 | 2200 | 75 | H | 1.3 | 15x45 | 100 | |
D3C-T39VB-080 | 8.0 | 10 | 1500 | 44 | 1.3 | ||||
D3C-T39VB-100 | 10 | 6.8 | 1000 | 26 | 1.6 | ||||
D3C-T39VB-120 | 12 | 3.9 | 600 | 17.2 | 1.6 | ||||
D3C-T39VB-150 | 15 | 2.7 | 400 | 12.6 | 1.6 | ||||
D3C-T39VB-200 | 20 | 1.5 | 220 | 6.8 | J | 1.5 | 15x45 25x45 | ||
D3C-T39VB-250 | 25 | 0.68 | 100 | 4.2 | 1.5 | ||||
型号编号 Choke type P/N. | 额定 电流Rate Current IR (A) | 共模电感Common Mode Inductance LCM( mH ) ±30% | 差模电感Differential Mode Inductance LDM( μH ) Typ. | 电阻RDC (mΩ) Typ. | 结构类型Configuration Type A ~F | 输出终端Terminals | 重量Weight 约 Approx. (g) | |||
引脚Pins Ф (mm) | 间距Spacing (mm) | |||||||||
D3C-T39VB-300 | 30 | 0.47 | 70 | 2.6 | K | 1.5 | 15x25 25x25 35x25 | 100 | ||
D3C-T48HB-080 | 8 | 18 | 2700 | 57.5 | L | 1.1 | 20 x50 | 210 | ||
D3C-T48HB-100 | 10 | 15 | 2250 | 36.8 | 1.3 | |||||
D3C-T48HB-120 | 12 | 10 | 1500 | 25.5 | 1.4 | |||||
D3C-T48HB-150 | 15 | 6.8 | 1000 | 14.8 | 1.7 | |||||
D3C-T48HB-200 | 20 | 3.9 | 580 | 8.9 | M | 1.3 | 30x50 20x50 | |||
D3C-T48HB-250 | 25 | 2.7 | 400 | 5.9 | 1.5 | |||||
D3C-T48HB-300 | 30 | 1.5 | 220 | 3.7 | 1.6 | |||||
D3C-T48HB-400 | 40 | 1.0 | 150 | 2.2 | N | 1.5 | 40x50 30x50 20x50 | |||
D3C-T48HB-500 | 50 | 0.68 | 100 | 1.5 | 1.7 | |||||
D3C-T48VB-080 | 8 | 18 | 2700 | 57.5 | P | 1.1 | 20x30 | 210 | ||
D3C-T48VB-100 | 10 | 15 | 2250 | 36.8 | 1.3 | |||||
D3C-T48VB-120 | 12 | 10 | 1500 | 25.5 | 1.4 | |||||
D3C-T48VB-150 | 15 | 6.8 | 1000 | 14.8 | 1.7 | |||||
D3C-T48VB-200 | 20 | 3.9 | 580 | 8.9 | Q | 1.3 | 30x30 20x30 | |||
D3C-T48VB-250 | 25 | 2.7 | 400 | 5.9 | 1.5 | |||||
D3C-T48VB-300 | 30 | 1.5 | 220 | 3.7 | 1.6 | |||||
D3C-T48VB-400 | 40 | 1.0 | 150 | 2.2 | R | 1.5 | 40x30 30/20x30 | |||
D3C-T48VB-500 | 50 | 0.68 | 100 | 1.5 | 1.7 | |||||
*H =卧式 V =立式 B=带底板H = Horizontal Type ; V = Vertical Type ; B = With Base Type
*结构类型 A , B ,C ,D … 参考尺寸图纸Configuration Type A , B ,C ,D… refer to the Dimensional Drawing
*测试条件 :
LCM: 两个绕组并联10KHZ , 0.1mA ,@ 25°CLCM: measured with windings inparallel, 10 KHZ , 0.1mA ,@ 25°C
LDM: 两个绕组并联10KHZ , 0.1mA ,@ 25°CLDM: measured with windings inseries, 10 KHZ , 5.0mA ,@ 25°C
RDC: 每个绕组 @25°CRDC : Per winding , @ 25°C
共模-差模阻抗Common Mode and Differential Mode Impedance



尺寸图( 结构类型 A ~R )Dimensional Drawing ( Configuration Type A ~R )


